Itead AC Current Transformer 5V Current Sensor Module 0-5A With 3P/4P Interface

Semi-finishedproduct : No High-concerned chemical : none Electronic : No DIY Supplies : Electrical Brand Name : Stlxy Origin : Mainland China Output Voltage : 5V

Overview:

This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals. The maximum current that can be detected can reach 5A, and the present current signal can be read via analog I / O port.

Specification: Type:Sensor Brick Interface:3PIN Power Supply:5V Board Size:30 × 24 × 1.6mm

Transformer: TA12-100, ratio 1000:1, measuring range 0~5A AC. Operating voltage: DC5V for mainstream microcontroller systems. Two interface choices: 3P PH2.0 socket and 4Pin straight header. Magnetic isolation separates high voltage AC mains and low voltage MCU circuit. Support 50Hz/60Hz power frequency AC measurement. Analog AC signal output, read by MCU ADC and calculate RMS current by firmware. Through-hole design, no need to cut the live wire during installation. Widely used in smart socket, power consumption monitor and overload detection. Notice: Only measure single live wire; do not pass live & neutral wire together. label:yes