Vgate vLinker MC+ BLE Bluetooth 4.0 For IOS Android SW-CAN MS-CAN OBD Diagnostic Tool

Description The V_Link01 is an OBD to UART interpreter IC designed to provide bi-directional half-duplex communication with the vehicle’s On-Board Diagnostic system (OBD-II). It supports all legislated OBD-II protocols, as well as two proprietary networks: for GM Single Wire CAN (for GMLAN), and for Ford Medium Speed CAN (MS CAN). A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.The V_ Link01 is fully compatible with the de facto industry standard ELM327 command set. Based on a 32-bit processor core, the V_ Link01 offers more features and better performance than any other ELM327 compatible IC.

Feature ■ Rich instruction set, compatible with more APP software. -- Fully compatible with ELM's AT command set; -- Fully compatible with STN's ST command set; -- Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN; --39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps. ■ Multiple protocols --15 ELM format protocols; -- 23 STN format protocols; -- Up to 64 user-defined protocols. ■ Multiple fieldbus. -- SAE J1850 VPW -- SAE J1850 PWM -- ISO 9141-2 -- ISO 14230-4 -- ISO 15765-4 CAN -- SAE J1939 CAN -- ISO 11898 (raw CAN) -- for GMLAN Single Wire CAN (for GMW3089) -- for Ford Medium Speed CAN (MS CAN) ■ Multiple power management solutions -- Compatible with ELM and STN power management solutions. -- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; -- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. -- Device sleep power consumption is less than 2 mA. ■ OBD request byte up to 48 bytes, can meet the needs of some special long frame communication. ■ UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps. ■ User-operated storage area -- 256-byte storage unit -- More than 100,000 erasable times -- Read and write operations on any unit in the storage area by using the VT command ■ " Mix ID Sending" mode of CAN protocol. -- Optional formatted send data according to protocol ■ Multiple WM sequence settings -- Support AT command to manually set WM sequence -- Support for specifying a protocol or a full protocol-wide temporary WM sequence -- Support for a permanent link between a protocol and a private WM sequence ■ Secure bootloader for easy firmware updates

Typical Applications • Vehicle telematics • Fleet management and tracking applications • Usage-based insurance (UBI) • OBD data loggers • Automotive diagnostic scan tools and code readers • Digital dashboards