Crimping Tool For Ferrules + 1200 Insulated Ferrules

Crimp Tool for Ferrules + 1200 Insulated FerrulesHigh-quality crimping tool for ferrules, 170 mm long, suitable for ferrules with diameters from 0.25 mm to 10 mm².Specifications:Working range: 0.25-10mm²Working range with double sleeve: 2x 0.5-4 mm²Length: 170 mmWeight: 360gFeatures:Precise, durable crimping jaws.The jaws automatically adjust to the cross-section of the crimped sleeve.

Adjustable clamping force.

Comfortable, easy-to-use tool handle.

High-quality workmanship, manufactured primarily for professionals, but suitable for any workshop. The kit includes a set of 1200 sleeves:200 xwhite metal sleeve (length: 8 mm;cross-section: 0.50mm²)200 xlight gray metal sleeve (length: 8 mm;Cross-section: 0.75mm²)200 xred metal sleeve (length: 8 mm;Cross-section: 1.00mm²)250 xblack iron sleeve (length: 8 mm;Cross-section: 1.50mm²)250 xblue metal sleeve (length: 8 mm;Cross-section: 2.50mm²)50 xgray metal sleeve (length: 9 mm;Cross-section: 4.00mm²)25 xyellow metal sleeve (length: 12 mm;Cross-section: 6.00 mm²)25 xred metal sleeve (length: 12 mm;Cross-section: 10.00mm²)Insulated ferrules made of nickel-plated copper with good electrical conductivity, cross-section 0.5-10mm².

Crimp degree adjustmentComfortable PVC handle Crimp tool instructions:Strip the insulation and place the ferrule on the wire, then insert it into the crimping tool.Pull open the crimper handle to open the jaws.

Place the ferrule in the jaws and press the tool handle firmly.

Remove the wire and check if the ferrule is properly crimped.