Dustproof Temperature Humidity Sensor Stainless Steel Plastic Housing I2C Output(SHT31)

Features: 1. Digital, the resolution up to 14 bits 2. Internal self calibration, no calibration required 3. Close combination of temperature and humidity for convenient dew point measurement 4. Anti leaching, dustproof, rust proof, high reliability and long term stability 5. I2C serial interface is easy to integrate 6. Compact product structure for field application and product integration 7. Applied to computer room monitoring, warehouse, construction site, concrete test block inspection, agricultural greenhouse, flower nursery, etc. Specification: Condition: 100percent Brand new Item Type: Temperature Humidity Sensor Model: FS400 SHT30 31 35 Working Current: <10mA Temperature Measurement Range: 20 celsius 100 celsius Humidity Measurement Range: 0 100percent RH Working Conditions: 40 celsius 120 celsius , 0 99percent RH Storage Conditions: 20 celsius 80 celsius , 0 95percent RH Housing Material: Stainless steel, plastic Line Length: Approx. 150cm 59.1in Weight: Approx. 115.8g 4.1oz Package Size: Approx. 20 x 14 x 3.7cm 7.9 x 5.5 x 1.5in Optional Style: SHT30, SHT31, SHT35 FS400 SHT3X Series Humidity Accuracy percent RH Temperature Accuracy celsius Voltage V SHT30 + 2 + 0.2 3.3 5 SHT31 + 2 + 0.2 3.3 5 SHT35 + 1.5 + 0.1 3.3 5 Package List: 1 x Temperature Humidity Sensor 1 x Cable Note: One. Relative humidity of air is a function of temperature. Air temperature has a great influence on relative humidity. Various compounds such as acid and alkali salts have a significant impact on the physical properties of water. The following items should be noted when using: 1. The temperature and humidity sensor should be installed in a place where the temperature is relatively stable and most representative of the measured ambient temperature and humidity. 2. Avoid installation in places where the temperature changes drastically. 3. Avoid installation in places where the air is flowing. 4. Avoid installing dead corners where air does not flow. 5. Avoid using it in a salt spray environment. 6. Avoid use in corrosive gas environments. 7. Avoid installing dead corners where air does not flow. Second, working conditions: The sensor has normal performance within the recommended operating range. Long term exposure to conditions outside the normal range, especially at humidity >80percent , may result in temporary signal drift (drift after 60 hours +3percent RH). When returning to normal After the working conditions, the sensor will slowly return to the calibration state. Prolonged use under abnormal conditions will accelerate the aging of the product. Third, storage conditions and operating instructions: Humidity sensors are not ordinary electronic components and require careful protection. This must be taken seriously by users. Prolonged exposure to high concentrations of chemical smell will cause the sensor reading to drift