433MHz RF Wireless Remote Control Switch 10A 220V Relay Receiver Mini Round Button Wall Panel Switch For Led Light Lamp Fan

Note: The relay controller is RF Receivers ,the wall switch is RF only. Wall switch itself cannot control lights on off. It needs to work with rf receiver together.

Specifications: Transmitter (Remote) : Operating frequency: 433MHz Power by 2 Pcs 3V CR2016 Battery (Battery included ) Material: PVC; Button: 2 buttons; Size: 60mm x 30mm; Operating voltage: 3V ; Operating Current: 12mA; Transmitting power: 10mw; Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 20 50m Controller (Receiver) : Input Power: AC90V-250V 60HZ/50HZ Max current: 10 A RF Frequency: 433Mhz Working temperature:-30 +80 RF working mode: superheterodyne Receive sensitivity: >97dbm Transmitting distance: more than 50 m ( open space) Remote storage:20pcs Support remote type: Learning code 1527code Size: 47.4*42*22.8 (mm)

Package Included: 1*Remote Control 1*Switch

433MHZ wireless switch signals How to get the signals Step 1: Press the learning button(on the Receiver) twice . Wait for 3 seconds; Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed. How to clear the signals Only one step :Press the learning button(on the Receiver) 8 times. Easy connect and multi control one The receiver is easy to install, Multi switches can control different receivers or one receivers strong signal and Long distance control Control the light in the room, even outside the room, The receiver can be remotely controlled up to 50 meters through a wireless switch and the signal can be controlled through the wall Wide range of application Products can be used in homes, farms, factories, offices, laboratories, supermarkets, and so on Remote control Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device\ Exhaust system, Kettle, water heaters \ Signal transmission \ Electrical equipment\Factory Home Office Ventilation Pump LED Light

How to get the signal Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds; Step 2: Press one button on the remote control or wall panel. Wait for 3 seconds. Succeed.

How to clear the signal Only one step: Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;