Lens protector exclusively for T1 and microT1 type red dot sights! Compatible with the SUREFIRE X300U-A! [Clamp-type attachment]
An industry first! This clamp-type lens protector securely attaches to red dot sight tubes.
The tube diameter may vary slightly depending on the replica...
The clamp-type design ensures secure attachment even if the tube diameter isn't exactly 28mm.
[The more skilled you are, the more likely your lens is to be hit...]
- Stronger airsoft players (commonly known as "thinners") tend to have higher lens damage.
This is because thinner players have a higher percentage of the lens surface exposed to barricades.
Of course, even those who aren't such players have experienced lens damage many times.
[High Bullet Resistance]
- Polycarbonate lens construction. Resists shattering even with multiple hits.
- The base is made of A6061-T6 material, also used in the aerospace industry.
[Firing Tested]
- The red dot sight was confirmed to have no damage to the lens or base after being fired at least a dozen times from 30cm from the muzzle with 0.2g BB bullets at a muzzle velocity of 94m/s (Gspec gun used).
[Manufacturing Method/Materials]
Lens: CNC-machined polycarbonate
Base: CNC-machined A6061-T6 aluminum alloy
[Replacement Lens Available]
Replacement lenses are available separately.
Please use these if the lens becomes scratched or has bullet holes.
[Compatible with X300U-A!]
Compatible with the SUREFIRE X300U-A. Installation and bullet resistance have been confirmed.
[Compatibility Information]
The following compatibility information has been provided by users.
・VECTOR OPTICS Maverick
・VECTOR OPTICS Maverick GENII-MIL SCRD-38
・SIG SAUER ROMEO5
・MARKS HD-1
・NOVEL ARMS COMBAT T1
・HOLOSUN HS403B
・HOLOSUN HS503C
[Please remove protective sticker before use]
A protective sticker is applied to the protector lens at the time of shipment.
Please remove the protective sticker before use.
Lens protector exclusively for T1 and micro T1 type red dot sights! Compatible with SUREFIRE X300U-A.
CNC-machined polycarbonate lens (2mm thick) for high bullet resistance! Please remove the protective film from the lens before use.
The lens is CNC-machined, so it's extremely clear and free of burn marks (please remove the protective film before use).
The clamp-type attachment method allows it to be securely attached to red dot sights.
The clamp-type design allows it to be securely attached to replica models with slightly different sizes.
