Servo Control Board High Power Controller Module Large Torsion Motor Driver 12V‑24V

Feature: 1. This servo control module can stably control the servo motor to work within a safe torsion and never drop the line. 2. This servo controller is perfectly compatible with for Futaba JR SANWA Hitec and other remote control systems. 3. The multi‑stage steering gear control board has high sensitivity, high torsion, a large stroke, and zero blind spots. 4. Enables input signals from remote control, multi‑channel steering gear controller and single‑chip microcomputer. 5. Has a small size and a light weight, the installation is very simple to complete, also very durable for long‑term use. Specification: Item Type: Servo Control Board Material: Glass Fiber Working Voltage: 12V to 24V (DC) (any voltage between 12V or 24V can be used) No Load Rotating Current: <500mA Maximum Torsion: 180kg.cm (24V) (actual measurement, not theoretically calculated value) 1764N.cm(24V) (actual measurement, not theoretically calculated value) 90kg.cm(12V) (actual measurement, not theoretical calculation value) 882N.cm(12V) (actual measurement, not theoretical calculation value) Angular Speed: 0.5s 60 degrees (0.5s is required to rotate 60 degrees), at 24V; 1.0s 60 degrees (1.0s is required for 60 degrees rotation), at 12V; Rotation Angle: 300 degrees Maximum (0 to 300 degrees electronic limit adjustable) Input Mode: Pulse Signal (remote control, multi channel steering gear controller, single chip microcomputer) or analog voltage signal (potentiometer). Pulse Signal Input Range: 0.5ms 2.5ms suitable for all multi channel steering gear controllers , 1ms 2ms model airplane remote control , MCU programming , etc.; Voltage Signal Input Range: 0V to +5V Control Accuracy: 0.32 degrees . Package List: 1 x Servo Control Board 4 x Screw Note: Do not use it outside the range of voltage and current parameters.