EU LVD Voltage : Low voltage: Below 50Vac or 75Vdc
High-concerned chemical : none
Power Source : DC
Theory : Voltage relay
is_d : Yes
Contact Load : Low Power
Model Number : 1 2 4 8 Channel 5V DC Relay Module Solid State High Leve
Brand Name : Stlxy
Voltage : 5V
Origin : Mainland China
Certification : NONE
Use : General Purpose
Protect Feature : Sealed
8 Channel 5V DC Relay Module Solid State High Level SSR AVR DSP for Arduino FZ1477Description:
5V solid state relays 240V 2A, output with resistive fuse 240V 2A.
Input power supply: 5V DC (160MA)
Input control signal voltage:
(0-2.5V low state relay OFF)
(3.3-5V state high relay ON)
Blue KF301 terminal connection control line is more convenient.
Module interface:
DC +: positive power supply (by relay voltage power supply)
DC-: connect power negative
CH: Relay Module signal triggering end (high level trigger effective)
Note:Power must be DC voltage and need to be consistent with the voltage relay
4 Channel 5V DC Relay Module Solid State High Level SSR AVR DSP
Description:
5V solid state relays 240V 2A, output with resistive fuse 240V 2A.
Input power supply: 5V DC (160MA)
Input control signal voltage:
(0-2.5V low state relay OFF)
(3.3-5V state high relay ON)
Blue KF301 terminal connection control line is more convenient.
Module interface:
DC +: positive power supply (by relay voltage power supply)
DC-: connect power negative
CH: Relay Module signal triggering end (high level trigger effective)
Note:Power must be DC voltage and need to be consistent with the voltage relay
2 Channel 5V DC Relay Module Solid State High Level OMRON SSR AVR DSP for ArduinoProducts:1, 5V solid state relays 240V 2A, output with resistive fuse 240V 2A.2. Size: 55 * 33 * 25 (L * W * H) Weight: 21.5g3, the input power supply: 5V DC (160MA)4, the input control signal voltage: (0-2.5V low state relays ON)(3.3-5V state high relay OFF)5, blue KF301 terminals to the control line is more convenient.Module Interface:Input section:DC +: positive power supply (according to the relay voltage supply)DC-: negative oneCH1: 1 relay module signal triggering end (low to trigger active)CH2: 2 relay module signal triggering end (low to trigger active)High and low meanings:High trigger finger is a signal to the trigger terminal (IN) between the negative power supply and has a forward voltage, usually with a trigger and trigger the positive terminal connected to the power supply, when the trigger end has triggered positive voltage or reach When the voltage, the relay is energized.Low voltage trigger refers to OV, or trigger voltage lower than the voltage supply terminal positive signal to trigger the end of the negative power between low enough to trigger the voltage, so that relay, usually the A negative trigger and the trigger end of the power connection, the relay is energized.Electrical parameters:Voltage version quiescent current working current trigger voltage trigger current 1 channel 5V 0mA 12.5mA 0-2.5V 2mA 2-way 5V 0mA 22.5mA 0-2.5V 2mAProduct description:1. The module power supply: Power must be DC voltage to match the voltage relay5V 1 Channel OMRON SSR High Level Solid State Relay Module 250V 2A For ArduinoProduct introduction:
1, 5V 240V solid state relay 2A, output resistive type insurance
Wire 240V 2A.
2, size: 25*34*25 (length * width * height) net weight: 13g
3, the input power supply: 5V DC (160MA)
4, the input control signal voltage:
(the state of the 0-1.5V low level relay ON)
(the state of the 2.5-5V high level relay OFF)
5, the blue KF301 terminal is connected to the line of control more convenient.
Module interface:
Input part:
DC+: connect the power supply positive (press the relay voltage power supply)
DC-: the cathode of a power supply
CH: relay module signal trigger end (low level trigger effective)
High level and low level of meaning:
High level trigger refers to the signal trigger end (IN) and the negative electrode of the power between
A positive voltage, usually with the positive pole of a power supply and a trigger terminal connection
A trigger mode, when the trigger end has a positive voltage or to trigger voltage, the relay is attracted.
Low level trigger refers to the signal triggering voltage between the end and the negative electrode of the power supply.
OV, or trigger terminal voltage lower voltage than the positive power supply,
Low to voltage can be triggered, make the relay, usually will power
The negative electrode and the triggering end of a trigger connected, so that the relay is attracted.
Electrical parameters:
Voltage version 5V
Quiescent current 0mA
The working current of 12.5mA
Trigger voltage 0-1.5V
Trigger current 2mA
Use products that:
Power supply of 1 modules: power supply must be DC electric
Pressure to conform with the voltage relay
The 2 wiring method:
When the signal triggering end of low level trigger, the relay will connect, equipment electrical work
label:yes
Toimetamata tagasimakse
