【Important Notice for International Buyers – Tomoayax Premium Audio Hi-Fi Japan】
■ Voltage Compatibility
This product is designed exclusively for use in Japan (AC 100V, 50/60Hz).
Many regions use 120V or 220–240V.
Using this product without a proper transformer in such voltage environments may result in malfunction, overheating, or serious and irreversible damage.
■ Plug Type
This product uses a Japanese plug (Type A or B).
A plug adapter may be required depending on your region.
■ Transformer Requirement (Very Important)
A transformer is required for safe use.
A plug adapter only changes the plug shape and DOES NOT convert voltage.
Using this product without a transformer may cause serious and irreversible damage.
■ Buyer Responsibility
As this is high-end audio equipment, the buyer is fully responsible for confirming compatibility with their local voltage (100V / 120V / 220–240V) and usage environment before purchase.
■ No Return / No Refund Policy
We do NOT accept returns or refunds for:
・Voltage mismatch (including 120V and 220–240V environments)
・Use without a transformer
・Plug incompatibility
・Damage caused by improper setup or usage
■ Liability
We are not responsible for any damage, malfunction, or performance issues caused by improper use or incorrect voltage conditions.
■ Final Notice
Please ensure full understanding of the above before purchasing.
Use only under the correct voltage environment.
100% copper interior, superior performance, standard size, no welding required, suitable for most speakers. Locks with two screws (top and bottom).
This is a set of four: two red and two black.
Gold plating ensures corrosion resistance, minimal signal loss, and durability.
No soldering required. Accepts bare wire, spade, or other banana plugs. Features a plug pin design; simply insert the wire and screw it in securely. Makes speaker installation easy.
It is very suitable for connecting satellite speakers and a center speaker to an AV receiver.
Dimensions: Length 50mm x Width 11mm x Inner diameter 4mm (Tip: Width 2mm x Length 18mm)
Single weight: Approximately 10g
Curved, pure copper, gold-plated, solder-free, screw-type, 2mm pin audio banana plugs, speaker cable banana clip plugs, speaker cable terminal blocks, audio cable terminal plugs (5 pairs/10 packs)
100% copper interior, superior performance, standard size, no welding required, suitable for most speakers.
It features a locking mechanism with two screws, one at the top and one at the bottom. These high-quality plugs are of the closed-screw type. They can accept bare wire or spade wire.
The entire plug is gold-plated to prevent corrosion. Please ensure a smooth connection.
They are designed for use with amplifiers and speakers, and are used as traditional terminals.
Connecting to the back of the amplifier is not only easier, but also safer, as there is no possibility of tangled strands causing a short circuit.
The color code is black/red, maintaining the correct polarity.
It is very suitable for connecting satellite speakers and a center speaker to an AV receiver.
These curved banana plugs make speaker installation easy.
Toimetamata tagasimakse
