This temperature controller is designed with dual-color LED display and has high of 0.1 celsius
It supports temperature correction, temperature alarm and delayed start function
Designed with screw terminals for convenient and easy wiring
Features:
This temperature controller is designed with dual-color LED display and has high of 0.1 celsius .
It supports temperature correction, temperature alarm and delayed start function.
Designed with screw terminals for convenient and easy wiring.
Water-resistant probe has higher sensitivity, sealed with silicone, more suitable for liquid temperature detection, safe and .
Widely used for temperature control in cabinets, industrial equipment, vegetable and flower greenhouses, etc.
Specifications:
Control Range -50 celsius .110 celsius
Control 0.1 celsius
Sensor Input 10K water-resistant sensor L=0. 5M
Temperature Alarm -49 celsius .110 celsius
Input Voltage 12V
Output Type Relay output . 10A
Return Difference Set 0.1.30 celsius
Delay Start 0.10minutes
Temperature Correction -10 celsius .+10 celsius
Red DisplayMeasured Temperature
Green DisplaySetting Temperature
Instruction:
K0 K1 Terminal:
Thermostat output type is relay output, K0 and K1 is equivalent to a extension relay ; 12V power supply the thermostat, sensor detects temperature, internal temperature control program control relay output and load (if the load is powered by AC power supply, it is to connect K0 and K1 to live wire)
Function Setting Range Default
P0 Temperature Control Mode H(hot)CelsiusC(cold) C
P1 Return Difference Setting 0.1.30 celsius 2 celsius
P2 Temperature Correction -10.10 celsius 0 celsius
P3 Delay Start 0.10 (min.) 0
P4 Temperature Alarm -49.110 celsius 110 celsius SET Button: Set
+ Button: Increase temperature
- Button: Reduce temperature
to Factory Settings: Power on, press and hold + and - buttons together for about 3 seconds.
P0 Temperature Control Mode:
This parameter must be set for first time using controller. If used for heating, set it as H; if used for cooling, set it as C.
P1 Return Difference:
Press and hold SET button to enter internal setting, select P1 setting, press the SET button again to set return difference value. (Return difference value is the value that controller restarts after it reached set temperature and stopped. For example, if we use heating mode, make controller stops at 40 celsius and restart at 35 celsius , the return difference value is 5)
P2 Temperature Correction:
This function is used for temperature correction, if there is a deviation between measured temperature and real temperature. Correcting Temperature= Measured Temperature + Correction Value.
For example, if the measured temperature is 25.6 degrees and the actual temperature is 25.8 degrees, set P4 as 0.2, so the final temperature is 25.6 + 0.2 = 25.8 degrees
P3 Delay Start:
This function is normally used for refrigeration. If controller is used in refrigerator , this value must be set. According to back pressure of , this value can be set between 3 and 6 minutes. If you don t use it to control or don t need delay function, you can ignore it.
P4 Temperature Alarm:
Set temperature alarm value, when the real-time temperature exceeds this value, the display will flash to alarm.
Heating mode setting example:
Control electric heating equipment to stop heating at 35 celsius , and restart when temperature is down to 30 celsius ;
1, Press and hold SET button for 3 seconds to enter internal setting, set P0 as H.
2, Press and hold SET button to return to the real-time temperature display, press SET button again and the green display flashes, then adjust the value to 35 celsius .
3, The default return difference is 2, it need to be set as 5 if want to restart at 30 celsius . Press and hold SET button to enter internal setting, select P1, change P1 value to 5.
Cool
Toimetamata tagasimakse
