Feature:
1. 1.5KW SINGLE INPUT AND OUTPUT: This is a single phase 220v inverter, 1.5kw single input and output, the selection is recommended to be a higher level. Achieve up to 16 speeds through a simple PLC function or a combination of X terminal status
2. AUTOMATICALLY MAINTAIN CONSTANT OUTPUT VOLTAGE: Easy to identify the closed loop control of the process control, which can automatically maintain a constant output voltage when the power supply voltage changes
3. AUTOMATICALLY LIMIT CURRENT AND VOLTAGE: The current and voltage are automatically limited during operation, and the torsion can be automatically limited to avoid frequent trips due to overvoltage or overcurrent
4. CONTROL ASYNCHRONOUS AND SYNCHRONOUS MOTOR: Realize the control of asynchronous motor and synchronous motor through high performance current vector control technology, support communication via for RTU, for PROFIBUS?DP, for CANLINK and for CANopen
5. COMPENSATE FOR VOLTAGE DROP: The load feedback energy can compensate for the voltage drop, so that the AC drive can continue to run for a short time, helps avoid frequent over current AC stick errors
6. SIMPLE LOGIC CONTROL: Five groups of virtual X or DOS can realize simple logic control, the time range is 0.0?6500.0 minutes, and four motors can be switched by four groups of motor parameters
Specification:
Item Type: Variable Frequency Drive
Input And Output Characteristics:
Input Voltage Range: Single phase 220V+15percent
Input Frequency Range: 50~60Hz
Output Voltage Range: Single phase 0~220V+15percent
Output Frequency Range: 0~600Hz
Item
Specification
Standard function
Maximum frequency
? Vector control: 0600Hz
?VF control: 0600Hz
Carrier frequency
0.516 kHz.
Carrier frequency automatically adjusted according to the load characteristics
Input frequency resolution
Digital setting: 0.01Hz
Analog setting: maximum frequency x 0.025percent
Control mode
? Sensorless flux vector control (SFVC)
? Voltagefrequency (VF) control
Starting torsion
Type G: 0.5Hz 150percent (SFVC);
Speed range
1:100 (SFVC)
Speed stability accuracy
+0.5percent (SFVC)
Torsion control accuracy
+5percent
Standard function
Overload capacity
Type G: 150percent rated current for 60s, 180percent rated current for 3 seconds
Torsion boost
?Fixed lifting
? After adjustment, boost 0.1percent 30.0percent
v f curve
?Straight line VF curve
? Multi point VF curve
?N Power VF curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
v f separation
Two types: complete separation; semi separation
Ramp mode
?Straight slope
? S curve slope
Four sets of acceleration deceleration time, range: 0.06500.0
Brake DC
DC braking frequency: 0.00Hz to maximum frequency
Braking time: 0.036.0s
Braking current value: 0.0percent 100.0percent
Jogging control
Slow frequency range: 0.0050.00Hz
JOG acceleration deceleration time: 0.06500.0s
Multiple preset speeds onboard
Achieve up to 16 speeds through combination of simple PLC functions or X terminal status
Onboard PID
Easy to identify the closed loop control of the process control
Automatic voltage regulation (AVR)
Can automatically maintain a constant output voltage when the power supply voltage changes
Overvoltage or overcurrent booth control
During operation, the current and voltage are automatically limited to avoid frequent tripping due to overvoltage overcurrent
Torsion limit and control
Can automatically limit the torsion and prevent frequent overcurrent trips during operation
.
Package List:
1 x Variable Frequency Drive1 x User Manual
Note:
Type Selection Instructions: 1. Please read the product instructions carefully, choose the type according to the function and power you need, and avoid the damage caused by incorrect wiring.2. Single phase motor selection must be enlarged by a level selection, 0.75 KW single phase motor, please choose 1.5 KW inverter3. Speed regulation of three phase AC motors with six or more stages. Please buy a converter with higher power than the motor.4. If you don"t know how to choose the style, you can also contact us to give you some suggestions.5. If you want detailed version of product manual, you can contact us to send it to you for free.
1.5KW SINGLE INPUT AND OUTPUT: This is a single phase 220v inverter, 1.5kw single input and output, the selection is recommended to be a higher level. Achieve up to 16 speeds through a simple PLC function or a combination of X terminal status
AUTOMATICALLY MAINTAIN CONSTANT OUTPUT VOLTAGE: Easy to identify the closed loop control of the process control, which can automatically maintain a constant output voltage when the power supply voltage changes
AUTOMATICALLY LIMIT CURRENT AND VOLTAGE: The current and voltage are automatically limited during operation, and the torsion can be automatically limited to avoid frequent trips due to overvoltage or overcurrent
CONTROL ASYNCHRONOUS AND SYNCHRONOUS MOTOR: Realize the control of asynchronous motor and synchronous motor through high performance current vector control technology, support communication via for RTU, for PROFIBUS?DP, for CANLINK and for CANopen
COMPENSATE FOR VOLTAGE DROP: The load feedback energy can compensate for the voltage drop, so that the AC drive can continue to run for a short time, helps avoid frequent over current AC stick errors
Toimetamata tagasimakse
