Specification:
Brand new
Material: Aluminum Alloy
Color: silver
Length: approx.330mm
Diameter: approx.1.6mm
Application: Aluminium and aluminium alloy welding, brazing
Feature:
Excellent corrosion resistance.
Low temperature, not rust.
Minimize parent material distortion during welding.
Applications include truck beds, loading ramps, docks, diamond plate, irrigation piping, engine blocks, transmission housing, etc.
Process:
Light the torch, (fire shall not betoo small, to be able to easily burn pipe next to the heat sink). End of burn (preferably vertical burning, the torch can be slightly higher, with blue flames), in the burning process on the electrode heating and welding solder powder on powder put it on the stick. With solder powder and try paddling at the required welding welding electrode, such as temperature, just like water into welding electrode. If take off the non-stick electrodes continue to the end of heating. (Not deliberately used in the welding process the flame burned electrodes, or keep it vertical burn status. Uploaded under the electrode will depend on melting temperature. Upon close you will find that the electrode is first melted under). Which is why cold electrodes can be causes of welding very thin aluminum parts. Wash after welding to weld solder powder, finished.
Package included:
10pcs x welding brazing rod
Note:
Please allow 1-3cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Toimetamata tagasimakse
