Properties: Waterproof, Insulating, Flame Retardant, Heat Resistant, Flexible
Application: Wires, Data Cables, Circuit Boards, Connectors, Tools, etc.
Drying Time: Touch dry in 15-30 minutes; fully cures in 2-6 hours (depending on thickness and environment).
(Wide Applications):
Ideal for DIY enthusiasts, homeowners, and professionals. Use it to repair and protect:
Electrical Wiring: Insulate spliced wires, seal wire nuts, and repair damaged cable jackets.
Automotive: Protect battery terminals, spark plug wires, and other engine compartment connectors from moisture and corrosion.
Marine & Outdoor Equipment: Waterproof connections on boat wiring, outdoor lights, garden tool cables, and RV electronics.
Electronics & Data Cables: Reinforce and strain-relief USB cables, headphone jacks, and circuit board connections.
Tools & Hardware: Coat tool handles for improved grip or prevent rust on metal parts.
(How to Use)
Ensure the surface is clean, dry, and free of oil, grease, or dirt.
Shake the bottle vigorously for at least 1-2 minutes before use.
Work in a well-ventilated area.
(Step-by-Step Instructions):
Clean and dry the wire or component surface thoroughly. For exposed wires, it's recommended to wrap them with standard electrical tape first.
Apply an even layer of the liquid tape using the built-in brush, just like painting nail polish. Ensure complete coverage of the area to be sealed.
*Wait 15-30 minutes for it to become touch dry. For best results and a thicker seal, apply 2-3 coats, allowing 10-15 minutes between each coat.*
*The product will fully cure into a tough rubber layer within 2-6 hours. Avoid exposure to water or mechanical stress for 24 hours.*
(Safety Warnings):
⚠️ Keep away from children and pets.
⚠️ Avoid contact with eyes and skin. Use gloves if necessary.
⚠️ Do not apply to energized circuits. Always disconnect power before starting work.
⚠️ Flammable when wet. Keep away from heat and sparks until fully cured.
⚠️ Store in a cool, dry place with the lid tightly closed.
No-delivery refund
