APPLICATION:
- The SABESTO adhesive is an ideal solution for attaching portal and stone frames at the existing development.
- It is recommended for various works related to gluing and sealing such materials as: metals, painted surfaces, wood, stone, concrete, plastics - polyester and rigid PVC.
PRODUCT FEATURES:
- High adhesion to a variety of materials and surfaces
- It binds homogeneous and diverse materials
- It compensates for unevenness and gaps in the bonded substrates
- It protects against vibration and provides sound insulation
- The glued elements can be corrected after mass lining
- It can be machined after the formation of the skin and lacquered without activating the surface (check the compatibility of the varnish and the mass)
- It does not corrode metals
- It is odourless
- It does not contain silicone.
INSTRUCTIONS FOR APPLICATION:
- The bonded elements must be clean, dry and free from dirt and grease. The mass that is not dried can be removed with a suitable remover. The dried mass can only be removed mechanically.
- Note! Do not allow contact with varnishes based on alkyd resins. It is not suitable for connecting glass, if the mass is to be exposed to UV rays. Direct sunlight can cause the yellowing of the mass and consequent spalling. Do not use for PE, PP, PTFE, silicone rubber, foamed polystyrene and plastics.
CHARACTERISTICS:
- White colour
- Packaging: Cartridge 300 ml
- Chemical base: PU (polyurethane)
- Storage conditions at +10°C to +25°C: 9 months
- Density: 1.2 kg / litre
- Change in volume: approx. 6%
- Time and speed of hardening: approx. 4mm / 24h
- Temperature of use: +5°C to +35°C
- Resistant to: Sea and lime water, weak acids and alkalis
- Short-term resistance to: fuels, mineral oils, vegetable and animal fats, vegetable and animal oils.
