---------------------------------------------------
【Voltage Compatibility】
Our products are selected to support international voltage ranges (e.g. 100–240V).
However, please make sure your local voltage is compatible before use, as incorrect voltage may still cause malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without appropriate voltage or equipment.
---------------------------------------------------
Screen Size: 4.3 inches; Mode: 16:9; Resolution: 480 x 272 RGB; Power Supply: DC12V; Operating Temperature: -15°C to 50°C; Reset: Press and hold the "+" button for about 2 seconds to reset the system to its initial state. Note: If the monitor does not display anything, check that the wiring is securely connected and not loose. This product is compatible with 12V vehicles; please verify that your vehicle's voltage is compatible with the system before purchasing.
[Monitor Part Names and Functions] To adjust the settings, power on the monitor. (Plug the car cigarette lighter charger into the cigarette lighter socket and connect the cigarette lighter charger cable to the monitor cable. Start the car engine to turn on the monitor.) Press the "Menu" button to switch to monitor settings. Press the "+" bar button to increase or decrease the brightness, darkness, and color saturation settings.
The display has two video inputs, V1/V2, and V2 has priority, so normally the rear camera is connected to V2, and the other front/side camera can be connected to V1. When driving, you can see the front through V1, and when you open the back door, V2 will automatically turn on and off.
This TFT LCD display and wireless car rearview camera system supports dashcams, DVDs, VCDs, STBs, satellite receivers, most TFT displays, and other video devices. Please remove the protective film before use. Note: The monitor supports CVBS mode and is not compatible with AHD cameras. Please check before purchasing.
The car display with built-in intelligent chip will automatically power on the screen when needed, highly preventing accidents and avoiding unnecessary losses and troubles.
4.3-inch Minion Dash LCD Monitor with Dual Video Inputs for 12V Vehicles and Reverse Switching
