Product Description
This spot sandblasting gun can be used immediately with just an air compressor.
Gravity-fired sandblasting guns often require frequent refills, but this sandblasting gun features a suction tank for wide-area application.
By placing the nozzle tip close to the work area, you can retrieve media while using the gun.
The retrieval system reduces media (sand) scattering while simultaneously reducing material loss.
It also comes with a variety of spot attachments, allowing you to choose the one best suited to your application.
This return-type sandblasting gun is also suitable for environments without a blast cabinet.
■Caution■
※Use air pressure of 0.62 MPa.
※Never use air pressures higher than the specified pressure. Also, lower pressures result in insufficient capacity and insufficient performance.
Caution (Disclaimer) > Please Read
※Use air pressure of 0.62 MPa.
※Never use air pressures higher than the specified pressure. Furthermore, if the pressure is low, the capacity will be insufficient and full performance will not be achieved.
This is a spot sandblasting gun that can be used immediately as long as you have an air compressor.
With gravity-fed systems, media would be used up quickly and require repeated refills, but the use of a suction tank makes this sandblasting gun ideal for spraying over a wide area.
By placing the nozzle tip in close contact with the work area, you can use the gun while collecting media. The collection system prevents media (sand) from flying around and also reduces material consumption.
Nozzle diameter: φ0.5 / Air nozzle size: φ2.8mm
Air pressure used: 0.31-0.9MPa / Air consumption: 45CFM
Sand discharge rate: 200g/min / Weight: 615g
Accessories: Spot attachments x 4, 500g media (sand), media bag
